DMC Group Contractors Ltd are industry leaders in design and build projects from demolition to cladding, we provide it all.


Please see our case studies below.

Case Studies

Seven Dials Warehouse

Seven Dials, Warehouse, Earlham Street, London WC2H 9LA.


Project Details

Enabling works to Seven Dials Warehouse

Duration : 5 weeks



An old gin factory, Seven Dials warehouse, dating from 1690 was refurbished and redeveloped to provide 60,000 sq ft mixed use space situated in the heart of Covent Garden. The Grade II Listed Building was redeveloped by Schroders in 2007 and is leased to tenants including Expedia, Urban Outfitters and Belgo. Incredibly this wedge shaped building had survived World War II but sadly in 1999 the building was substantially destroyed by a fire and Fletcher Priest Architects were commissioned to re-design and re build the fire damaged property.


Since then refurbishment to the ground floor and mezzanine was completed to create 6,200 sq ft of warehouse style office or retail space. This was leased to Expedia, who then sub-let to Facebook. Facebook then signed a deal to relocate to its West End offices at 10 Brock Street, Kings Cross.

The 43,549 sqft of vacant space was required to be stripped back and reinstated, ready for a Category A fit-out to be re-marketed to potential new tenants.


The Building is formed of basement, ground and 5 upper floors. DMC Group were initially commissioned to carry out Intrusive Investigation Works at Seven Dials Warehouse to floors, Ground, mezzanine, 3rd, 4th and 5th floors. Once works commenced it was clear, that in order for the Project Team to establish a clearer understanding of the current state of fabric and potential available space, DMC Group could assist by stripping out a vast amount of the existing finishes. This enabled the Structural Engineers and Architect to formulate a more extensive Category A re-fit. DMC Group we also able to validate the tenant Mechanical & Electrical Installations and advise on redundant and removable equipment.



Strip Out

The basement, 1st and 2nd floors of the premises were occupied for the duration of the works, so a thorough understanding of the existing Building Services were required to ensure uninterrupted services to the remaining tenants.



Noisy operations were required to be carried out early morning or after normal working hours.



No on site parking was available on this project. The surrounding Streets were restricted, therefore DMC were required to co-ordinate collections and deliveries accordingly.


Problem Solving

There was no evidence of any M&E drawings on site. It was uncertain which items could be removed without affecting other areas of the building. Validations were required by DMC to establish areas that could be safely removed or decommissioned.



Project Considerations


Waste Collections

There was no off-street parking available on site. Deliveries and collections were required to be carefully programmed to ensure minimal disruption to the surrounding roads. DMC had recently added two Iveco Tipmaster trucks to our fleet, which assisted hugely with the restrictions of the area and ensured a more efficient and effective way of managing our Waste collections.

Case Studies

Vogue House

Vogue House, Hanover Square, London W1S 1JU.


Project Details

Enabling works to Vogue House

Duration : 6 weeks

Works : Strip out | Demolition | General Builders Works

Return to top ^



Nestled in the heart of central London, just off Oxford Circus, Vogue House is where shoots get prepped, fashion features written and the big ideas discussed.


Vogue House is a 7-storey office building in Mayfair, designed by architects Yates, Cook & Darbyshire and completed in 1958.


British Vogue headquarters is located in this building facing Hanover Square and siding St George's Street, inside Mayfair’s Conservation Area.


Home to Condé Nast, the publisher of established magazines such as Vogue, Vanity Fair and Wired. There is 23m2 retail unit fronting St. George Street selling Condé Nast magazine publications.

Planning permission was sought for in 2015 for change of use from retail space (Class A1) to office space (Class B1), so that part of the ground floor and basement could be used as office accommodation, which included external alterations to the façade. The A2 space was previously occupied by HSBC bank, who vacated the premises in 2014.


DMC were appointed to carry out the reinstatement works of the ground floor and basement area and make some essential adjustments to the façade of the building.

Strip Out

Although the ground and lower ground floor premises were unoccupied for the duration of the works, the building on all other floors remained in full occupation, during working hours. Site working hours had to be agreed with the contract administrator prior to Commencement on site. Keeping in regular contact with the Premises Manager was essential to ensure that we could programme our works to coincide with access by their Management and Visitors.



No noisy operations on week days to be restricted to the hours of 08.00 - 10.00 and 12.00 - 14.00 and 16.00 -18.00. Noisy work can be undertaken on Saturday mornings between the hours of 08.00 - 10.00.


Problem Solving

Working closely with the Building Management, and within the noise restraints, DMC undertook a bulk of the work during the evenings to ensure minimal disruption to the remainder of the building and occupants.


Concrete Repairs

Within the works required, DMC had to make good to some of the existing floor slab. Some of the remaining fixings from the previous tenant had to be broken out from the concrete – items such as an

overnight safe and an existing strong room.

Structural Steels

In the basement area, DMC were required to remove a safe deposit room and make good any openings left including the concrete floor. There was also a strong room located in the basement and 2 staircases accessing the basement from the ground floor. During these works, we were required to install structural steel beams to ensure that the original bearing capacity was achieved.

Stone Repairs

At part of the works, DMC were required to undertake some stone repairs. There was an area where an ATM cash machine had been installed. Once removed, DMC installed a temporary frame and façade

to ensure the property was secure. DMC then brought in specialists who sourced matching stone and carried out the reinstatement.

Basement Works

Due to height restrictions in this area and minimal access, DMC employed the use of a BROKK excavator. The use of this specialised equipment meant that removal works could be carried out within the low ceiling height, effectively and efficiently.


Window Reinstatements

DMC were required to remove the existing 3 panes of glass in two areas, which used to house cash machines and replace with one solid window pane.

Project Considerations


Waste Collections

We were provided with 2 Parking Bays within the lower ground car park for removal of waste. There was no off-street parking available on site. We were also required to make all reasonable endeavours to maintain the communal areas and external areas and keep them as clean and debris free as possible during the works. The basement car park is used regularly by the tenants and we had to schedule skip deliveries and collections with the Building Manager to ensure that access to the car park was managed during the works.

Case Studies

Install full SFS substrate and Rainscreen


Project Details

Duration : 10 months

Works : install full SFS substrate + Rainscreen cladding

Return to top ^

This mixed-use scheme on a brownfields site of 400 bed space for students and 361 m2 of retail at street level makes good use of colour and material, including Taylor Maxwells welsh cut stone hung directly on a Vivalda helping hand carrier system with a Kawneer AA100 zone drained curtain walling system creating a great divisions between the façade faces.

Leading the project from pre design to completion our on site team developed innovative structural solutions to improve efficiency, speed up construction and minimise costs.


We are proud to have delivered this project early with a healthy 27% profit margin and our specialist subcontractor CladTech achieved a snag free hand over.

Case Studies

Install curtain walling and Trespa rain Screen.


Project Details

Duration : 7 months

Works : Install curtain walling + Trespa rain screen.

Return to top ^

Irlam and cadishead school features a variety of learning spaces including a new sports gym, drama and dance studio with a music and technology suite. With a capacity for 900 pupils from 11 to 16 years of age and 150 sixth formers.

Our remit on this project was to over clad the pre-cast concrete structure using certified RGB helping hand carrier system, mineral fibre insulation along with a timber effect Trespa façade panelling. We used SGA’s AA541 top hung windows along with anodised window pod flashings installed in to preformed apertures to give the building a truly distinctive appearance.

Case Studies



Project Details

Duration : 8 months

Works : Sample rain screen.

Return to top ^

The Pendlton enabling project was 2.1m to carry out emergency removal of the façade up to the fourth floor slab with fully occupied residences. Carry out in depth status reports of the system and substrate. Following on from the inspection and remedial work to the rain screen carrier system DMC then cut and installed fire proof Cembrit board to match the existing façade panels. The work was carried out across 9 tower blocks totalling 9000m2. The project was fully completed and handed back to the client ahead of scheadual.

This floor spanning over cladding system was supplied by System Building Products and installed on location by DMC Group.


The design has been carried out Mark Heywoods Associates in accordance with British standard codes on wind loading, Structural use of aluminium, corrosion at bimetallic contacts and method of testing for structural fixings.


Work commenced by removing Reynabond pannels from the gable end of Salix Court. Once the task had been completed the operatives then began to remove each T rail from the carrier system along with insulation and fire break to expose the buildings brick work. Any historic penetrations in the brick substrate were then injected with EPDM sealant to protect the structure from water and air ingress.


Dead load brackets were then installed using Fischer FIS V 360s resin and stainless steel A40-70 Threaded rod. Brackets were then installed at designed increments to first floor slab along with helping hand brackets to the second-floor slab.


Teflon coated fixings and washers were used on the systems components to reduce friction and provide isolation between dissimilar materials.


Once the installation of the T rails to the brackets had been completed operatives lined and levelled the grid before installing Tenmat Ventilated Fire Barrier at floor slab level.


A constant 30mm air gap was maintained between the intumescent strip and the back of the support rail to allow for free air flow with in the compartments.

Case Studies

Install full Brick Slip Cladding System


Project Details

Duration : 8 months

Works : Install full Brick Slip Cladding System.

Return to top ^

Glazed Brick Soffit


The building is a shared occupation letting office occupying 2 levels. Our aim was to allow the designer to create a stunning soffit utilising the glazed brick slip which is indistinguishable from traditional laid brick. The project has been tested to meet BS8414 Part 2 Fire Performance of External Cladding Systems.


Fastclad Brick Slip Rainscreen was used on the tower elements of the main block, the balconies as well as the first and second floors of the main building for its weight, ease of installation and its fire properties. Pearl blue glazed brick slip was used a eye catching feature on the façade, expertly colour matched and mortared.

Our Accreditations

Return to top ^


DMC House, 7 Bimbury Lane,

Detling, Kent, ME14 3HX


Tel: 01622 631997

Email: info@dmc-group.co.uk





Tel: 0151 3191351

Email: info@dmc-group.co.uk





Tel: 0161 7379846

Email: info@dmc-group.co.uk

Company Registration Number. 08515347

VAT Number. 167931672.  © Copyright 2018